Telephone cable

Rg6 coaxial cable

Rg6 coaxial cable for connection between the frequency bandwidth of digital set-top boxes to reach 3,000 trillion.

Coaxial cable can be divided according to their diameter: thick coaxial and thin coaxial cable. Thick suitable for relatively large local area network, its standard long distance, high reliability, eliminating the need for cutting the cable during installation, it can be flexibly adjusted according to the needs of the computer network location, but thick cable network must be installed transceiver cable, installation difficult, so the overall cost is high. Instead, the thin cable installation is relatively simple, low cost, but because of the installation process to cut off cable ends must be fitted with basic network connector (BNC), and then connected to the T-connectors at both ends, so long as the joint is easy to produce bad risks, which is currently running one of the most common faults that occur in the Ethernet. Thick or thin cable are either bus topology, namely on a cable connected to multiple machines, this topology is suitable for machine-intensive environments, but when a contact failure, failure will affect the entire root cable series All machines .. Fault diagnosis and repair is very troublesome, therefore, will gradually be replaced by network cable or fiber optic cable.

rg6 cable

Home|About Us|Product|Quality Control|Raw Material|News|Contact Us

Copyright Shenzhen Biadi Technology Co.,Ltd. All Right Reserved

Technical Support: Reanod